35
TROUBLESHOOTING
The answering
system does not
work.
● Make sure the base unit is plugged in.
● Make sure the answering system is turned on.
● Press RESET after an AC line spike.
PROBLEM
The answering
system does not
answer calls.
● Set the REC TIME switch to either the one minute or
four minute option.
● The memory may be full. Delete some or all of the saved
messages.
Messages are
incomplete
After a power
failure, the
outgoing message
is deleted.
● The incoming messages may be too long. Remind callers
to leave a brief message.
● The memory may be full. Delete some or all of the saved
messages.
● Record your personal outgoing message again.
The default message should remain.
No sound on the
base unit speaker
during call
monitoring or
message playback
● Adjust the speaker volume on the base unit.
Cannot access
remote call-in
features from
another touch-
tone phone.
● Make sure you’re using the correct PIN.
• Make sure that the touch-tone phone you’re using can
transmit the tone for at least two seconds. If it cannot, you
may have to use another phone to access your messages.
SUGGESTION