Filter
Top Products
25
The clock on the DGA940 Answering System starts when power
is applied to the base.
To set the correct time:
1. Press and hold clock until a tone sounds.
2. Press
skip or repeat
until the correct day is announced.
Numbers 0 through 6 display as each
day is announced.
3. Press clock again to select the day.
The hour setting is announced.
4. Press
skip or repeat
until you hear the current hour setting.
Numbers 1 through 12 display as
each hour is announced.
5. Press clock again to select the correct hour.
6. Press
skip or repeat until
you hear the current minute setting. The numbers
0 through 59 display as each minute is announced.
7. Press clock again to select the correct minute.
The AM/PM setting is announced.
8. The LED displays an A or P. Press skip or
repeat until you hear the correct AM/PM setting.
9. Press clock again to complete your settings.
The DGA940 Answering System announces the correct time.
SETTING THE CLOCK
ANSWERING DEVICE SET-UP