Filter
Top Products
1. Insert two mounting screws (with their
appropriate anchoring device) into the wall
100mm apart. Allow about 5mm between the
wall and screw heads for mounting the phone.
2. Snap the desktop/wall mount
adaptor into the bottom of the base
as shown.
3. Plug the AC adaptor cord into the
10V DC input jack on the back of
the base.
4. Put the AC adaptor cord inside the
molded wiring channel. Wrap it around
the strain relief notch. Plug the AC
adaptor into a standard 240V AC wall
outlet.
5. Plug one end of the telephone
cord into the
TEL LINE jack
on the back of the base. Plug the other
end into a telephone jack.
12
Be careful not to insert the
mounting screws
into possible electrical
hazards such as cables,
wiring, or pipes.