Filter
Top Products
The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.
Accidentally pressing memory
key a, b, c, or d after
pressing mem., may result
in unintentional dialing.
22
22
1. Remove the handset from the base.
2. Press mem. The talk/batt low LED blinks.
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
redial/p to insert a pause.
4. Press mem again.
5. Enter the memory location (01-20) on the
keypad or press memory key
a, b, c, or d. A tone indicates that
the number is stored.
▼ Using the memory location features
1. Press
talk.
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
▼ One touch memory dialing
Press memory key
a, b, c, or d. The number automatically dials.
1. Remove the handset from the base unit.
2. Press
mem button twice.
3. Press the memory location (01-20) or memory
a, b, c, or d to be erased.
A tone indicates that the stored number is erased from memory.
ERASING A STORED NUMBER FROM MEMORY
DIALING A NUMBER IN MEMORY
a
b
c
d
talk
mem
redial/p
STORING A PHONE NUMBER IN MEMORY