Filter
Top Products
31
CAUTION! DO NOT use a microwave oven to speed up the
drying process. This will cause permanent damage to the
handset, base and the microwave oven.
Changing from Tone to Pulse Dialing
Your phone communicates with the telephone network two ways: tone
dialing or pulse dialing. Most telephone companies use tone dialing. If
your phone company uses pulse dialing, you will need to change your
phone’s dial mode.
From a handset, open the menu and select Global Setup.
Select Dial Mode, then select Pulse. The phone sounds a
confirmation tone.
If you use pulse dialing and you need to send DTMF tones during a call
(if you’re using an automated response system, for example), press
*
to temporarily switch to tone dialing. When the call ends, the phone
automatically returns to pulse dialing mode.
Reseng and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
Press and hold
End
and
#
until the
System Reset menu appears (about
5 seconds).
Select Deregister HS. The display
lists all registered handsets.
Select the handset you want to reset.
When the handset asks you to
confirm, select Yes. The handset
clears its information from the base
and deletes its own link to the base.
1.
2.
3.
4.
Press and hold
End
and
#
until the System Reset
menu appears (about 5
seconds).
Select Base Unavailable.
When the handset asks
you to confirm, select
Yes. The handset deletes
its own link without
contacting the base.
1.
2.
3.
1.
2.