Filter
Top Products
22
Chain dialing
If you often have to enter a series of digits or a code number
during a call, you can save that code number to a phonebook entry
and use the phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just
like a regular phonebook entry. Be sure to enter the code number
into the phonebook exactly as you would enter it during a call.
During a call, when you hear the prompt that tells you to enter the
number, open the phonebook and find the entry that contains your
code number. Press
MEnu/sELECT
to transmit the code. Or, if you
change your mind, use
PhonEbook/LEfT
to close the phonebook.
Voice message nocaon
This feature supports Frequency-Shift Keying (FSK) message
notification. Contact your voice mail provider for more details.
If you subscribe to a voice mail service, your phone can notify you
when you have a new message waiting.
When you have new messages, the voice message icon ( ) appears
in the display, and the light at the top of the handset blinks.
The voice message icon should disappear after you listen to all
your new messages. If it doesn’t, you can reset it manually: With
the phone in standby, open the menu and select Global Setup.
Select VMWI Reset, then select Yes.
USING THE ANSWERING SYSTEM
Answering System Opons (
Ans. Setup
)
You can change the answering system options from any handset. Just
open the menu and select Ans. Setup. Select one of the following:
Security Code
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 26).
Ring Time
Set the number of rings (2, 4, or 6) before the
answering system answers the phone. Choose Toll
Saver to have the system answer after 2 rings if you
have new messages or after 4 rings if you don’t.