Filter
Top Products
7
Most cellular phones automatically transfer the audio to a
Bluetooth device as soon as it pairs; if yours does not, look in
your cellular phone’s Bluetooth setup for a “transfer audio”
or “send audio to device” option.
To test the connecon
Pick up the handset from the cradle.
Dial the number you want to call, then press
cELLLink
on the
handset. You may not hear a dial tone or ringing, but the handset
display says
Talk
.
Make sure the call connects and you can hear clearly. (When you’re
finished, press
End
to hang up.)
The DECT3181 remembers the pairing information for your cellular;
if it loses connection with your phone for any reason (e.g., the
cellular phone travels out of range, runs out of charge, etc.), the
DECT3181 can automatically reconnect the next time your phone
becomes available.
Using the DECT3181 with four Bluetooth phones
The DECT3181 can save the pairing information for four different
Bluetooth phones, but it can only use one cellular line at any given
time. For example, if you pair the DECT3181 to four Bluetooth
phones, when you press
cELLLink
on the handset, the DECT3181
asks which phone you want to connect to.
If you are using the DECT3181 to talk on one Bluetooth phone, the
DECT3181 will not ring if a call comes in on another phone.
You can set a different ring tone for each paired cellular phone (see
page 16).
To pair another Bluetooth phone, just repeat the pairing procedure
with the new phone. (If the paired phones interfere when you’re
pairing the new one, just turn off Bluetooth on any paired phones
until you finish pairing the the new one.)
1.
2.
3.