Filter
Top Products
37
dialing. If your phone company uses pulse dialing, you will need to change
your phone’s dial mode.
From a handset, open the menu and select
Global Setup
.
Select
Dial Mode
, then select
Pulse
. The phone sounds a
confirmation tone.
If you use pulse dialing and you need to send DTMF tones during a call
(if you’re using an automated response system, for example), press
*
to temporarily switch to tone dialing. When the call ends, the phone
automatically returns to pulse dialing mode.
Reseng and Registering Handsets
If you are having trouble with a cordless handset or if you want to replace
one, you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
Yes No
Press and hold
End
and
#
until the
System Reset menu appears (about 5
seconds).
Select Deregister HS. The display lists
all registered handsets.
Select the handset you want to reset.
When the handset asks you to
confirm, select Yes. The handset clears
its information from the base and
deletes its own link to the base.
1.
2.
3.
4.
Press and hold
End
and
#
until the System Reset
menu appears (about 5
seconds).
Select Base Unavailable.
When the handset asks
you to confirm, select
Yes. The handset deletes
its own link without
contacting the base.
1.
2.
3.
Registering a handset
When you reset a handset (or if you buy a new one), that handset displays
a
Handset Not Registered
message. If you see this message on a
handset, you need to register it to a base before you can use it.
1.
2.