Uniden DECT3181 Answering Machine User Manual


 
34
If… Try…
The DECT3181 won’t
pair with my phone.
Making sure your phone is in pairing mode.
Check your phone’s manual for instructions on
Bluetooth device pairing.
Making sure your phone supports the
Bluetooth hands-free profile.
Making sure your phone is in range of the base
If DECT3181 appears in your cellular phone’s
paired device list, remove it and try pairing
again.
Turn your phone off, then turn it on again.
Repeat pairing steps.
Disconnecting the base AC adapter. Wait a
few minutes, then reconnect it. Repeat pairing
steps.
Checking the link order for that phone. In rare
cases, some cellular phones may not be linked
as the third or fourth cellular phone.
-
-
-
-
-
-
-
-
The DECT3181 paired
with my phone, but
I can’t hear anything
through the handset.
Adjusting the handset volume.
Setting your cellular phone to transfer the
audio to a Bluetooth device. Check your
phone’s manual for instructions on Bluetooth
setup and options.
Erase all Bluetooth pairing and repair again. To
erase the Bluetooth pairing, see page 15.
-
-
-
Weak or hard to hear audio
If a caller’s voice sounds weak or soft, the signal might be blocked by large
metal objects or walls; you might also be too far from the base, or the
handset’s battery may be weak.
Try moving around while you’re on a call or moving closer to the base
to see if the sound gets louder.
Make sure the handset’s battery is fully charged.
Try adjusting the earpiece volume.