Uniden DECT3181 Answering Machine User Manual


 
5
adapter for the charger. See the separate DRX312 or DWX317 user
guide that was packaged with your phone.
Plug the other end of each adapter into a standard 120V AC power
outlet.
Place one handset in the base and the other(s) in the charger(s) with
the display(s) facing forward. The display on the handset should light
up; if it doesn’t, reseat the handset or try plugging the AC adapter
into a different outlet.
Charge all handsets completely (about 15 hours) before using
them.
Connect the telephone cord
Connect the
TEL LinE
jack to a standard telephone wall jack.
Test the connecon
Pick up the handset from the cradle and press
TaLk/fLash
. You
should hear a dial tone, and the display should say
Talk
.
If you don't hear a dial tone, try checking the connection between
the base and the phone jack.
Make a quick test call. (Press
End
to hang up.)
If the tone doesn’t stop when you dial, try changing to pulse dialing
mode (see page 36).
If there's a lot of noise or static on the call, see page 35 for tips on
avoiding interference.
Test any accessory handsets the same way. If you can’t get a dial
tone or the handset display says
Unavailable
, try resetting the
handset (see page 37).
Seng Up the CellLink™ Bluetooth™ Connecon
The new DECT3181 with CellLink technology can connect with mobile
phones that support the Bluetooth V2.0 handsfree profile.
Visit Uniden.com or contact customer service for a detailed list of tested
mobile phones.
6.
7.
1.
2.
3.