Filter
Top Products
[70] EXPANDING YOUR PHONE
www.uniden.com
From the base to a handset
1) During a call, press
intercom/find handset
on the base. The call will automatically be
placed on hold, and an intercom tone sounds. All the handset(s) will be paged.
2) On the receiving handset, to answer the call, press
talk/flash
or
hold/transfer/int'com
.
The intercom mode is activated, but the caller is still on hold. Or press any number key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is On), or pick up the handset from the cradle
(when AutoTalk is on).
3) To speak to the caller, press
talk/flash
on the receiving handset.
Replacing the Base
If the base unit is replaced with a different base from this same series of cordless models,
you must clear the handset(s) and base identification numbers. To do this, select “System
Reset” from handsets display menu option list (see page 29 for guidance).
For model number
verification, contact
Uniden Customer
Service or visit our
website
www.uniden.com
note
EXPANDING YOUR
PHONE