Filter
Top Products
[68] EXPANDING YOUR PHONE
www.uniden.com
4-Way Conferencing
Fourth person, at either the handset or the base, may be added to the conference call. For
example, to add a fourth party to an ongoing conference call at the base or another handset,
press
talk/flash
on the fourth party's handset (or (speaker) on the base). To remove
either caller from your conversation, press
end
on the party's handset (or (speaker) on
the base). The other parties will still be connected to the call.
Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or to the base
1) Press
hold/transfer/int'com
in standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press
ring/vol/
∧
or
ring/vol/
∨
,
and then press
select/
. If you select
All
, all handsets
and the base will be paged. An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press
talk/flash
or
hold/
transfer/int'com
(or
intercom/find handset
or (speaker) on the base). Or press any
number key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is on), or pick up the handset
from the cradle (when AutoTalk is on).
4) To hang up the intercom call, press
end
on either handset (or
intercom
on the base).
6QKPVGTEQO
*CPFUGV
*CPFUGV
•If the party is busy or
out of range, the
handset returns to
standby mode.
•If any of the following
occurs while selecting
the other handset
(or the base), the
operation will
be canceled.
-Press talk/flash
or speaker.
-Receive an outside/
intercom call or page.
•When the party does
not answer within one
minute, the operation
is canceled.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
note
EXPANDING YOUR
PHONE