Filter
Top Products
[2] QUICK REFERENCE GUIDE
www.uniden.com
Step 3 Connect to Phone Line
When the handset battery pack
is fully charged after 15-20
hours of charging, plug the
telephone cord into the base
unit and then into a telephone
wall jack.
Your phone is set for tone
dialing. If your local network
requires pulse dialing, please
see “D. Choose the dialing mode” on page 15.
Step 4 Setting Caller ID & Language Display Options
TO SET CALLER ID ON CALL WAITING AND CALL
WAITING DELUXE
For all Handset Menu Setup Options, refer to page 22.
Press
menu/del
in standby mode.
Press
ring/vol/
∧ or
ring/vol/
∨ to select
Global
Setup
and then
select/
.
Press
ring/vol/
∧ or
ring/vol/
∨ to select
CIDCW
and
then
select/
.
Press
ring/vol/
∧ or
ring/vol/
∨ to select
CW On/CWDX
On
,
CW On/CWDX Off
, or
CW Off/CWDX Off
and
then
select/
.
TO SET LANGUAGE
Press
menu/del
in standby mode.
Press
ring/vol/
∧ or
ring/vol/
∨
to select
Handset Setup
and
then
select/
.
Press
ring/vol/
∧ or
ring/vol/
∨
to select
Language
and then
select/
.
Press
ring/vol/
∨ to choose a
language and then
select/
.
Step 5 Setting Up the Answering System
TO TURN THE ANSWERING SYSTEM ON/OFF
Each time
ans on/off
is pressed, the answer mode is switched
between On and Off.
TO SET GREETING MESSAGE
Press and hold
greeting
until voice prompt
“recording greeting” plays.
Position yourself near the
base mic, and begin
recording your greeting.
When finished recording,
press
greeting
or
play/stop
.
Your greeting will playback
for confirmation.