Filter
Top Products
[20] GETTING STARTED
www.uniden.com
Answering Setup
This main menu option allows you to set up TAD settings from your handset. You can also set
these submenu options from the base (see page 53).
Submenu option Description
Security Code
Select a two-digit Personal Identification Number (PIN) code. A PIN code is
required to play your messages from a remote location, you will need to enter
a two-digit PIN code (see page 25).
Ring Time
Allows you to set the number of rings the caller hears before your answering
system plays the outgoing message. You can set the ring time to answer after
two, four, or six rings. Setting "TS" (Toll Saver), the answering system picks
up after two rings if you have new messages, and after four rings if there are
none (see page 26).
Record Time
Set the duration for recording the incoming messages. You have three record
time options. The options "1 minute" or "4 minutes" set the duration for
recording the incoming messages. "Announce only" answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving
a message (see page 26).
Message Alert
Lets you know when you have a new incoming message by sounding a short
alert tone (see page 26).
Language
Select the Language of your answering system announcements from English,
French, or Spanish (see page 26).
Call Screen
Allows you to screen an incoming call before answer the call. Set the call-
screening feature to On or Off (see page 27).
GETTING STARTED