Filter
Top Products
[58] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Screening a call
From the base
To screen an incoming call, do the steps as follows:
1) After the answering system answers, the base speaker will let
you hear the calls as the machine records the message. To
adjust the volume, press ring/volume/∧ or ring/volume/∨. If
you set the answering system to Off, you cannot screen a call.
To mute the call screen, press play/stop when the system
is answering.
2) To answer the call, press (speaker) or pick up the handset
from the base (when AutoTalk is set to On).
If the handset is away from the base, press talk/flash, speaker or any number key,
*
/tone/←, or #/→ (when Any Key Answer is set to On). The answering system will
disconnect automatically.
From the handset
1) Press select/ when the system is answering.
To mute the call screen, press end when the system is answering.
2) To answer the call, press talk/flash, otherwise press end to cancel the call screen and the
system return to standby mode.
THE INTEGRATED
ANSWERING DEVICE