Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [51]
www.uniden.com
Answering System Default Settings
Some answering system functions can be set through the base or handset.
Default settings for each function are as follows:
Turning the Answering System On/Off
1) To turn the answering system On, press
ans on/off
in
standby mode.
After the announcement "Answering System is on", the
current greeting message will be played and you will hear
a confirmation tone. The message counter displays the
number of messages stored in memory. If the display flashes,
then there are new messages waiting for you.
2) To turn the answering system Off, press
ans on/off
. After the announcement "Answering
System is off", the message counter display will no longer be illuminated.
Functions Default Setting
Reference Page
*To activate the clock and
time stamp, you must
setup the Time function.
Base Handset
Answer On/Off On P. 51
−
Time SUN 12:00 AM* P. 54 P. 27
Security Code 80 P. 54 P. 25
Ring Time Toll Saver P. 55 P. 26
Record Time 1 minute P. 55 P. 26
Message Alert Off P. 56 P. 26
Language English P. 57 P. 26
Call Screen On P. 57 P. 27
THE INTEGRATED
ANSWERING DEVICE