Filter
Top Products
ADDITIONAL INFORMATION [ 45 ]
ADDITIONAL INFORMATION
If you have wall
mounted the base,
you must remove
the beltclip to
charge the handset
facing forward.
INSTALLING THE BELTCLIP
To attach the beltclip
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release
the tabs from the holes.
HEADSET INSTALLATION
Your phone may be used with an optional headset,
the Uniden HS910. To use this feature, insert headset
plug into the headset jack. Your phone is ready for
hands-free conversations.
TRU248_2.4GHz_OM 7/26/00 1:12 PM Page 45