Filter
Top Products
[ 36 ] THE INTEGRATED ANSWERING DEVICE
SETTING UP YOUR ANSWERING SYSTEM
Turning the answering system on/off
1 To turn the answering system on, press . The current greeting message will be played
and a tone will sound.
2 To turn the answering system off, press again.
Setting the clock
The clock on TRU 248 Answering Sysytem starts when power is applied to the base. Follow these steps
to set the clock to the correct time.
1 Press and hold until a tone sounds.
2 First, press or repeatedly until the correct day of the week is announced.
(Number
0
through
6
displays on the base as each day is announced.) Press again
to select the day.
3 Next, press or repeatedly until you hear the correct hour setting. Numbers
1
through
12
display on the base as each hour is announced. Press again to select
the correct time.
4 Press or repeatedly until you hear the correct time setting. Numbers
0
through
59
display on the base as each minute is announced. Press again to
select the correct time.
5 The LED displays
A
or
P
. Press or until you hear the correct AM/PM setting.
6 Press again to end the time/day setting. The TRU 248 announces the time that you have set.
clock set
repeat
skip
clock set
repeat
skip
clock set
repeat
skip
clock set
repeat
skip
clock set
answer on/off
answer on/off
When the answering system is full, FL displays on the base and the system announces
“No remaining time”. You should delete some messages so that the system can record
new messages.
• Press or
multiple
times to scroll
through days,
hours, minutes,
etc.
repeat
skip
• If you don’t set the
clock within two
minutes, the
system returns to
standby.
TRU248_2.4GHz_OM 7/26/00 1:12 PM Page 36