Filter
Top Products
[ 14 ] BASICS
AutoTalk when ringing
When the AutoTalk setting is on and there is an incoming call, simply lift the handset from the base
unit to answer the phone. See “Setting Caller ID options” on page 26 for more details.
Any key answer when ringing
When the AutoTalk setting is on and the handset is off the base, press any handset key to answer
the incoming call.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress, press to switch to the new
call. If you also subscribe to Call Waiting on Caller ID, you will see the name and number of the caller
in call waiting. (See page 33.)
From the base
1 The phone rings. The status LED on the base flashes.
2 Press and begin speaking.
3 To hang up, press .
speaker
speaker
flash
status
LED
Microphone
TRU248_2.4GHz_OM 7/26/00 1:11 PM Page 14