Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [ 43 ]
THE INTEGRATED
ANSWERING DEVICE
Remote room monitor
You can call your answering system from any touch-tone phone and monitor sounds in the room
where your base is installed.
1 Call your telephone number.
2 While the greeting message is played, press
#
and your PIN code.
3 The answering system begins announcing the time and day.
4 Press
#
then 5 to stop the messages.
5 Press
#
then
*
. You hear sounds in the room where your phone is installed. After 15 seconds, the
answering system returns to the command waiting mode.
6 Press
#
then
*
to monitor the room for another 15 seconds. Or select another remote function.
Or hang up to exit the system. The answering system automatically returns to standby.
Turn on the answering machine remotely
If you have forgotten to turn on your answering machine, you can turn it on remotely from any
touch-tone telephone.
1 Call your telephone number.
2 Wait ten rings until the machine answers.
3 Enter your PIN code. The answering system begins to announce the time and day stamp.
4 Press
#
then 5 to stop the announcement.
5 Press
#
then 6 to turn the answering system on.
6 Hang up the phone and subsequent calls will be answered by the machine.
TRU248_2.4GHz_OM 7/26/00 1:12 PM Page 43