Toshiba DKT2510-FSD Telephone User Manual


 
64
Strata CT Digital Telephone User Guide November 2001
Speed Dial Features
To answer an incoming call using speakerphone
Speed Dial
Speed Dial enables you to call a telephone number with a brief access code. There are two types of
Speed Dial numbers:
Station assigned by individual station users to their own station and can only be dialled from
the station that assigns it.
System only assigned from attendant consoles or a designated station (typically the System
Administrators station), and can be used by other stations. (See System Administrator User
Guide for storing instructions.)
Important! If you do not perform the following procedures within a specified time (set in system
programming for either one or three minutes) when storing speed dial numbers, the
operation times out and your telephone returns to idle mode.
1. With the handset on-hook, press
the
Line
or [DN] with the flashing
LED.
The Line or [DN] LED flashes green (in-use) and you
are connected to the call.
2. Speak at a normal voice level
toward the telephone.
3. Press
Spkr
to disconnect the call.