Filter
Top Products
52
Strata CT Digital Telephone User Guide November 2001
Message Waiting Features
Message Waiting Light on [PDN]
➤
To answer a Msg light
➤
To cancel the Msg light
1. Press
Msg
, then lift the
handset.
If you reach a station that is
busy or does not answer, go
on-hook and press
Msg
again.
The system rotates to the next
message sender.
Your phone rings the station or voice mail device that
set the indication. The LED continues to flash red.
The LCD can show up to three
stations that have left messages
for the [PDN] and three for
each of your [PhDNs].
2. Press
Scroll
to display them.
In the example (shown at
right), the display indicates
that station DN [
203] received
a message signal from DN [
201].
The “+” indicates additional messages.
3. After receiving the message(s),
place the handset on hook.
If the Msg LED continues to flash, you have more
messages–repeat the Steps to retrieve them. Voice mail
devices may cancel the indication after a short delay.
➤ Press
Msg
and lift the handset. Your Msg LED turns OFF when the called party
answers.
Note The called party must answer–by either going
off-hook or by pressing
Spkr
–for the
indication to be cancelled automatically.
Your Msg LED turns OFF without calling the
telephone or VM device.
...or [DN] +
#409
to cancel
the light. This must be done for
each message recorded.
NO. 204
CALL 203-201+