Filter
Top Products
102
Strata CT Digital Telephone User Guide November 2001
Memos LCD Operation
Memos
Speed Dial Memos
You can store names (12 characters max.) for each of 40 station speed dial numbers. The memo pad of
names can be scrolled to select the appropriate party. The station must be enabled via system
programming for LCD message memory.
➤
To program Speed Dial names and numbers
3. Press
Page
. Your LCD confirms the message
was sent.
1. Press
Redial
, then
Speed
Dial.
2. Dial a station speed dial code. See Table 17 on Page 158 for speed
dial codes.
3. Press
Mode
. If a name was previously stored on
this code, it appears on the top line.
4. Enter the name or memo (12
characters maximum).
The name appears on the bottom line as you enter it. (See
“To enter LCD characters” on Page 94.)
5. Press Mode
.
6. Enter a phone number (16
characters maximum).
The number displays on the top line as you enter it.
7. Press
Redial
to record data in
memory.
MSG SEND
# * 100 SPEED DIAL
*100 NAME
SPEED DIAL