Filter
Top Products
Strata CT Digital Telephone User Guide November 2001
101
LCD Operation Messages
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The busy station can
return a message to the calling station’s LCD. The two stations may continue this procedure to carry
on a “silent” conversation. Soft Keys must be OFF (
Mode
+
7 0
) at the sending and receiving
stations for this feature to operate.
➤
To send a message to a busy station
➤
To return to a busy station message after receiving a busy station message
1. When you receive a busy tone,
press
Mode
+
2
.
210=[DN]
2. Enter the message number. Station message (10~19) and
system message (60~99). The LCD
displays the message. (This
assumes the message is already
stored in memory.)
3. Press
Page
. The destination station beeps four
times and the message displays for
30 seconds, or until you hang up.
Your LCD confirms the message
was sent.
1. Press
Mode
+
2
.
2. Enter the message number. Station message (10~19) and system message (60~99). The
LCD displays the message. (This assumes the message is
already stored in memory.)
OVER TO ST210
MSG NO?
MSG SEND
OVR TO ST210
MSG NO?