Filter
Top Products
122
Strata CT Digital Telephone User Guide November 2001
Call Forward (CF) Single Line Digital Telephone Features
#604
-Busy/No Answer Forwards calls immediately to another station whenever you are
busy on another call. Calls also forward if you do not answer
within a certain time (that you designate). Not available from a
rotary telephone.
3. Enter the Call Forward
destination number.
Confirmation tone is heard.
4. If setting CF-No Answer or
CF-Busy/No Answer, press
*
,
enter the time in seconds, then
press
#
.
You can enter the amount of time that your telephone rings before
it forwards (08~60 seconds). Always enter two digits. If you do
not wish to change the ring time, press
*
then
#
to make the ring
time the same as the last setting.
If you are unable to dial DTMF tones by pressing
*
and
#
, see
your System Administrator.
You hear a confirmation tone after pressing
*
and again after
pressing
#
.
5. Hang up.
Notes
●
You can continue using your phone in the usual manner while
Call Forward is in effect.
●
If Call Forward is set:
♦
Exchange lines that ring your station exclusively will
forward—Exchange lines that ring more than one station
will not forward. (Release 3.2 or higher will allow more
than one station to ring and follow the call forwarding.)
♦
Exchange line calls transferred to your station will
forward.
♦
Internal calls will forward.
♦
Call Forward has priority over the hunt feature set in
system programming.