Filter
Top Products
User’s manual
4-10
OPERATING BASICS
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
◆ Always copy data from the HDD to the CD. Do not use cut-and-paste.The
original data will be lost if there is a write error.
◆ Do not perform any of the following actions:
◆ Change users in the Windows XP operating system.
◆ Operate the computer for any other function, including use of a mouse or
Touch Pad, closing/opening the LCD panel.
◆ Start a communication application such as a modem.
◆ Apply impact or vibration to the PC.
◆ Install, remove or connect external devices, including the following:PC card,
USB devices, external display, i.LINK devices, optical digital devices.
◆ Open the optical media drive.
◆ If the media is poor in quality, dirty or damaged, writing or rewriting errors may
occur.
◆ Set the computer on a level surface and avoid places subject to vibration such
as airplanes trains, or cars. Do not use an unstable surface such as a stand.
◆ Keep mobile phones and other wireless communication devices away from the
computer.
Disclaimer (CD-RW/DVD-ROM drive)
TOSHIBA does not bear responsibility for the following:
◆ Damage to any CD-R/RW or CD-RW/DVD-ROM disc that may be caused by
writing or rewriting with this product.
◆ Any change or loss of the recorded contents of CD-R/RW or CD-RW/DVD-
ROM disc that may be caused by writing or rewriting with this product, or for
any business profit loss or business interruption that may be caused by the
change or loss of the recorded contents.
◆ Damage that may be caused by using third party equipment or software.Given
the technological limitations of current optical disc writing drives, you may
experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. Also, it is a good idea to make two or more
copies of important data, in case of undesired change or loss of the recorded
contents.