Filter
Top Products
User’s manual
4-4
OPERATING BASICS
Loading discs
To load CD/DVDs, follow the steps below and refer to figures 4-2 to 4-6.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
Figure 4-2 Pressing the DVD-ROM eject button
b. Pressing the eject button will not open the drawer when the DVD-ROM
drive’s power is off. If the power is off, you can open the drawer by
inserting a slender object (about 1.5 mm) such as a straightened paper clip
into the eject hole just to the right of the eject button.
Figure 4-3 Manual release with the eject hole