Filter
Top Products
36
Deskmaster
13.7 Telephone reset
It is always possible to reset your unit back to the default
settings and clear all memories.
• select the system parametermenu
• Select the reset menu.
The menu can be directly accessed
using the shortcut
264
• Confirm to enter.
•Press OK to reset the unit
• The unit will restart.
Note : All settings and memories will be deleted
when doing reset.
13.8 Caller ID Display Configuration (number, name, OFF)
The ISDN phone provides the feature to configure the caller ID display to the user’s needs:
• Display of caller ID number (default).
• Display of subscriber name. The phone book will be searched for the phone number and the
corresponding name will be displayed, if available.
• Caller ID OFF.
In case of caller ID display switched off, no transmitted nor received subscriber numbers will be
displayed. The caller ID display can only be programmed in idle state of the phone.
• Idle state.
• Go to the number display menu.
• Select the menu.
• Select the function or go to the next item.
• Select the function or go to the next item.
• The selected mode will be stored.
If number display is switched off, the number of incoming
as well as outgoing calls will be represented with “x”.
250 System param.
System param.
253 charge
264 Reset
Reset
Are you sure ?
EEPROM Reset
Please wait…_
Mo. 21 Feb 99 17:26
Topcom
Mo. 21 Feb 99 17:26
200 Number display
Number display
Display : Name
Number display
Display : Number
Number display
Display : OFF
xxxxxxxxxx
connected
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 36