Filter
Top Products
25
Deskmaster
• Select a register (1 of 5) and enter the
phone number required.
By specifying the filter type, you can define, whether the programmed numbers should be signalled
by the audible ringer or not.
The following functions are available:
Menu Function
Filter Off • The filtering on barring of caller IDs will be switched OFF.
Filter On • Only calls of one of the phone numbers programmed will be signalled by
an audible alarm. All other calls are only indicated on the phone display.
Filter Barring On • Calls received from one of the phone numbers programmed will not be
signalled by an audible alarm. The call will only be indicated on the
display. All other calls will be signalled by an audible alarm.
Note : The “Quiet” function is also available from the menu structure. This function disables the audible signalling
for all calls.
10.3 Setting Ringing Tone and Volume
You can select the loudness and the melody for incoming calls to the phone. With several phones in
one room, the calls can thus be distinguished acoustically. The loudness can be set to increase auto-
matically step by step to the maximum. This function can be disabled.
The following ringing tones can be configured:
• MSN : Up to 3 different “Multible Subscriber Numbers” (MSNs) can be configured for your
phone. Each can have an individual ringing tone programmed.
(See also section “Programming MSNs”)
• Special Ringing Tone : Up to 3 Caller ID’s can be programmed to be indicated by a special
ringing tone.
Filter
132 Number
Number
3 :
Number
3 : 0123456_
Filter
132 Number
Filter
131 selection
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 25