Telular SX5P CDMA2000 Telephone User Manual


 
Connect the Handset
Before you can use the SX5, you must connect the handset cable.
1. Connect the handset cable to the phone jack - see Figure 8.
2. Connect the handset cable to the handset - see Figure 8.
Desk Mounting
A wedge is included with the SX5 to be used to position the SX5 for easier viewing of the LCD
screen and keypad. Attaching the wedge is optional. To attach the wedge, use the following
instructions.
1. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the SX5 - see
Figure 9.
NOTE: Holding the wedge at an angle makes it easier to slide the wedge tabs into the
bottom tab slots.
Wedge slots
Battery tab slot
and screw
Wedge tabs
Wedge tabs
Figure 9 - Battery slot and wedge slots.
Phone jack
Handset cable
Handset
Figure 8 – SX5 handset connection.
Phonecell
®
SX5 CDMA 3 User Manual