Filter
Top Products
WINDOWS 98 SETUP
To configure a Windows 98 computer and SX5 to work together, follow these steps.
1. Connect your computer and the SX5 with a Telular USB cable (part #1L01A043 or
81025901) or serial cable (part #1L01A042 or 81025801).
2. If you are using a USB cable, install the Telular USB drivers from the included CD.
3. Set the SX5’s data port type (MENU > 6: Data Settings > 1: Data Port Type) and set
its baud rate (MENU > 6: Data Settings > 2: Baud Rate) to 115200 (19200 when faxing)
4. Install the SX5 as a new modem by opening Start > Settings >Control Panel, then
clicking on the “Modems” phone icon.
5. Select ‘Standard 19200 bps Modem’ and click on ‘Properties’.
Phonecell
®
SX5 CDMA 27 User Manual