Filter
Top Products
Customizing your CLIÉ™ handheld (Preferences) 85
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Setting the Network preferences for a wireless LAN (for PEG-TJ37 only)
Searching and setting a wireless LAN access point manually
1 Tap V at the top right corner of the Preferences screen, and
select [Network].
2 Tap [V Service:], and select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Tap [Scan].
The Connection Progress dialog box is displayed until a wireless
LAN access point is found at least. When wireless LAN access point(s)
is(are) found, it(they) is(are) displayed on the ScanResult screen.
Tip
The existing wireless LAN access point may be not detected via Scan operation
because of an electric wave condition or timing. Moreover, profile may be set to be
hidden at the wireless LAN access point side. In this case, your CLIÉ handheld also
can not detect it.
5 Tap one from the found wireless LAN access points, then tap
[Select].
The Wireless LAN Setup screen is displayed.
6
Tap [
V
None] under [WEP :], then select the type of WEP key.
The WEP KEY Input dialog box is displayed.
7 Enter the WEP Key, then tap [OK].
The WEP KEY Input dialog box is closed.
8 Tap [OK].
The Wireless LAN Setup screen which added new SSID setting for the
selected wireless LAN access point under [Profile Name :] is displayed.
9 Tap [OK].
The Wireless LAN Setup screen is closed, and the Preferences
screen for [Network] is displayed.
01US01COV.book Page 85 Wednesday, December 3, 2003 10:02 AM