Filter
Top Products
Beaming 163
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Beaming between your CLIÉ handheld and another Palm OS
®
PDA
Beaming information
You can beam the data on your CLIÉ handheld to another Palm OS
®
PDA
device that has an IR port.
1 Select the data, category, or business card you want to
beam.
2 Tap (Menu).
The menu is displayed.
3 Tap one of the following:
• The Beam command for an individual record
• In Address only: Beam Business Card
• Beam Category
Tip
You can also perform [Beam Business Card] by pressing the
Address Book button for about 2 seconds.
4 When the Beam dialog box is displayed, point the IR port of
your CLIÉ handheld directly to the IR port of another Palm
OS
®
PDA device.
The Beam dialog box shows that the transfer is complete.
Tip
For best performance of the data exchange, keep 4 to 8 inches (approximately 10 to
20 centimeters) between your CLIÉ handheld and the other Palm OS
®
PDA device.
Do not place any obstacle between the devices. The optimum distance for beaming
may vary depending on devices.
Location of the IR port may vary
depending on your model.
Continued on next page
• • • • • • • • • • • • • • • • • • •
01US01COV.book Page 163 Wednesday, December 3, 2003 10:02 AM