Filter
Top Products
119
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Performing the IR HotSync
®
operation
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
2 Click (HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window once again,
and select [Setup...] from the shortcut menu.
The Setup window is displayed.
3 Click [Local].
4 Adjust the following settings as needed.
• Serial port: Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to [Infrared Monitor] in [Control
Panel].
• Speed: Determines the speed at which files/data are transferred. Try
the rate, as [As Fast As Possible] first, and adjust downward if you have
any problems.
5 Tap [OK].
The IR HotSync
®
operation is enabled.
Note
When performing the local HotSync
®
operation with a USB cable, you need to restore
the local HotSync settings.
b For details, refer to “To restore the local HotSync settings” on page 120.
01US01COV.book Page 119 Wednesday, December 3, 2003 10:02 AM