Filter
Top Products
114
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Customizing HotSync
®
Manager startup and
HotSync
®
setup options
1 Click (HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window, and select
[Setup...] from the shortcut menu.
The Setup window is displayed.
2 Click [General], and select the setting as needed.
If you are not sure which option to use, select [Always available].
• Always available: Starts HotSync
®
Manager when Windows
starts. This allows you to perform the HotSync
®
operation even when
Palm™ Desktop for CLIÉ is not running.
• Available only when the Palm Desktop is running: Starts the
HotSync
®
Manager when you start Palm™ Desktop for CLIÉ.
• Manual: Starts HotSync
®
Manager only when you select
[HotSync
®
Manager] from [Start] in Windows.
3 Click [Local] and adjust the setting for the connection
between the computer and your CLIÉ handheld as needed.
• Serial port: Specifies the computer port that is used for the HotSync
®
operation. Make sure that the serial port for the HotSync
®
operation is
not shared with the port for modem.
• Speed: Determines the speed at which files/data are transferred. Try
the rate, as [As Fast As Possible] first, and adjust downward if you have
any problems.
Note
You cannot perform the HotSync
®
operation via a serial port between your CLIÉ
handheld and a computer.
4 Click [Modem], and select the setting for the modem as
needed.
5 Click [Network], and select the setting for the network as
needed.
6 Click [OK] to finish.
01US01COV.book Page 114 Wednesday, December 3, 2003 10:02 AM