Filter
Top Products
STEP 1: PREPARE THE SCANNING HARDWARE
ant to attach
str
STEP 2: ENABLE CORDLESS SCANNING
1. Tap Start | Settings | System tab | Socket Scanner
Settings.
2. Tap on the CS tab at the bottom of the screen. Check Enable
Cordless Scanner support.
Refer to your CHS or CRS manual for hardware preparation
instructions. You will need to install and charge the
battery/batteries. If using the CHS, you may also w
the tether. If using the CRS, you will also need to assemble the
aps.
3. Tap ok to save your changes.
36