Filter
Top Products
Page 92 of 113
intelligent wireless platform
airHaul
2
Nexus PRO™ User Guide
Table 8-1 System Configuration
Page Item Descriptions
System Name
Displays name of airHaul
2
Nexus PRO unit
Allows user to change airHaul
2
Nexus PRO unit name
System Description
Displays description of airHaul
2
Nexus PRO unit
Allows user to change airHaul
2
Nexus PRO unit description
SNMP Security
Access the SNMP security settings
Reset
Reset device
Delayed Reset
Schedule a reset
NTP Server
NTP server setup, as well as NTP time if server is setup
Software Version
Display the installed firmware version
Radio Firmware
Version
Display the installed radio firmware version
Edit Configuration
Provide links to edit IP, radio, configurations
Reset To Factory
Defaults
Resets the device to factory default settings
Ethernet MTU Size
Set the Ethernet MTU Size
Syslog server IP
Address
Displays the current message syslog server IP Address.
The user can change the IP address.
SNMP Trap IP
Displays the current SNMP trap IP address.
The user can change the IP address.
Log Level
Displays the current Log Level
WatchGuard
Suspends/Enables the radio defenders.
If the WatchGuard is suspended, the defenders will stop for 2 hours and
start again thereafter.
If the WatchGuard is enabled the radio defender’s will start immediately.
Note: The Radio Defenders will monitor the Wireless Association Status
(automatically) and traffic and take corrective action if needed.
Radar Scan
Radar Scan can be enabled or Disabled.
LED Control
Displays the current led on status.
The user can change the LED status to on/off
Current
Operational mode
Displays the current operational mode.
The user can change the current operational mode.