Filter
Top Products
Page 53 of 113
intelligent wireless platform
airHaul
2
Nexus PRO™ User Guide
2.8.2 Wireless Configuration
The wireless parameters need to be configured to allow the Remote Bridge airHaul
2
Nexus PRO unit
to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Bridge Mode wireless association parameters:
1 Go to the menu bar and from the Radio dropdown menu, select the particular radio that has
to be configured with the wireless settings in the Remote Bridge Mode.
2 Enter the SSID of the Root Bridge airHaul
2
Nexus PRO unit.
3 Enter the radio MAC address of the Root Bridge airHaul
2
Nexus PRO unit.
4 Choose a radio domain from the drop down list.
5 Choose a radio channel to associate the client with the root device.
6 Select the Transmit power of the radio from Dial-a-Power dropdown menu
7 Select the gain of the antenna from the dropdown menu as per the gain of the antenna being
used with the equipment.
8 Enter the RF cable loss based on the cable specifications
9 Click the Apply Changes. The units will attempt to associate.
Note: Clicking on ‘Status’ will display further details on the association
Figure 2-37 Remote Bridge Wireless Settings