Filter
Top Products
Page 56 of 113
intelligent wireless platform
airHaul
2
Nexus PRO™ User Guide
2.9.2 Wireless Configuration
The wireless parameters need to be configured to allow the Remote Router/NAT airHaul
2
Nexus PRO
unit to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Router/NAT Mode Wireless IP Settings
parameters:
1. Click on the ‘Wireless IP Configuration’ link from the ‘Summary Information’ page.
2. Enter the wireless ‘IP address’, ‘IP Mask’ and ‘Gateway IP’ address for the airHaul
2
Nexus
PRO unit.
3. Check the ‘Enable DHCP’ checkbox to obtain an IP address automatically from network.
4. Click on the ‘Apply Changes’ to change the settings.
Figure 2-41 Remote Router/NAT Wireless IP Configuration