Sanyo CAS-D6325 Cordless Telephone User Manual


 
E31
USING YOUR PHONE
Tone Dialing Switch Over
If your phone is set to pulse dialing, you can temporarily switch to tone dialing after the call connects. This feature is useful
when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone prescription refills,
customer support menus, etc. Make your call normally. Once your call connects, press */TONE on the handset. Any digits
you enter from then on will be sent with tone dialing. When this particular call ends, the phone automatically returns to
pulse dialing.
See Changing the Dial Mode on page E10 for instructions on setting your phone for pulse or tone dialing.
Line Mode Setup (Base only)
The Line Mode Setup feature is only used in instances where you have multiple phones where users may pick up an
extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting that
an extension phone is picked up will you ever need to change this feature. There are three settings for this feature: TYPE-A,
TYPE-B, or OFF, but change this option only when instructed to by customer service. In most all situations, this feature will
never need to be used or modified from the factory default setting of TYPE-A.
If you have multiple bases, select the base you need to change the setting ( see page E16 ).
Press MENU/SELECT. Select the GLOBAL SETUP menu, and then the SET LINE MODE submenu.
IF INSTRUCTED BY CUSTOMER SERVICE PRESS [SELECT] appears. Press MENU/SELECT.
Move the cursor to select TYPE - A, TYPE - B, or OFF.
Press MENU/SELECT. You will hear a confirmation tone.
1.
2.
3.
4.
5.
UC590EH.indd E31UC590EH.indd E31 8/19/2008 11:39:07 AM8/19/2008 11:39:07 AM