Filter
Top Products
E30
USING YOUR PHONE
Muting the Ringer (One call only)
While the phone is ringing, press on the handset or on the base to mute the ringer for this call. The phone will ring
again on the next call.
Muting the Microphone
Mute turns off the microphone so the caller can’t hear you. This only works while you are on a call.
Press
/MUTE. MUTE ON and appear in the display; remains while muting is on.
To cancel muting, press
/MUTE again. MUTE OFF appears.
Seven-Digit Dialing
In some areas, the telephone company may allow you to place a local call by dialing only seven digits (instead of ten). If
this is the case in your area, you can program your local area code in your phone. Programming your area code will allow
you to see the caller’s seven-digit phone number which will allow you to easily return the local call without modifying the
number before dialing. If you get a call from outside your area code, you will see all ten digits.
To program your local area code:
Press MENU/SELECT. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Use the number keypad (0 through 9) to enter a three-digit area code. If an area code has already been stored, it
appears in the display. Press CLEAR/INT’COM to delete the stored code, and then enter a new one.
Press MENU/SELECT. You will hear a confirmation tone.
Note:
If you have multiple bases, select the base before programming the area code ( see page E16 ).•
1.
2.
1.
2.
3.
UC590EH.indd E30UC590EH.indd E30 8/19/2008 11:39:07 AM8/19/2008 11:39:07 AM