Filter
Top Products
E11
GETTING STARTED
Plug the AC adapter into a standard 120V AC wall outlet.
Plug the modular cord into the TEL LINE jack.
Route the modular cord through the hole of the wall mount bracket as shown.
Plug the modular cord into the telephone wall jack.
Align the mounting slots on the base with the mounting posts on the wall. Then push
in and down until the phone is firmly seated.
Notes:
DO NOT use an AC outlet controlled by a wall switch.
To mount the phone directly on the wall, insert two #10 screws (minimum
length of 1 3/8 inches (34.9 mm), not supplied) into the wall, 3 15/16 inches
(100 mm) apart; leave the screw heads 1/8 inch (3.175 mm) away from the
wall to allow room for mounting the phone. Be sure the wall is capable of
supporting the weight of the phone, and use the proper type of anchoring
device for the wall material. No need to route the telephone cord through the
hole of the wall mount bracket when mounting directly on the wall.
•
•
5.
6.
7.
8.
9.
Wall plate
AC adapter (supplied)
AC outlet
Route the cord.
Wall plate
AC adapter (supplied)
AC outlet
Route the cord.
UC590EH.indd E11UC590EH.indd E11 8/19/2008 11:39:00 AM8/19/2008 11:39:00 AM