50
SELECT RING TONE
Each ITP-5112L user can select from a variety of ring tones.
From the LCD:
• Press MENU button.
• Scroll to SOUND/SCREEN option and press ENTER.
• Scroll to RING TONE SELECT and press ENTER—OR—you may dial 1 and
immediately enter the option.
• Select from one of the three categories:
1. Standard Ring Tones
2. Melody or
3. My Ring Tones
• Press ENTER to select. Use LEFT/RIGHT arrow buttons to scroll through the
available ring tones and press ENTER to SAVE.
• Press CANCEL to return to the Main Option Page—OR—press END to return
to idle screen.
CHANGE YOUR PASSCODE
From the factory,your station passcode is 1234.You can change your station pass-
code whenever you desire.
• While on-hook,press TRANSFER and then dial 101.
• Dial your old passcode.
• Dial a new passcode (must be four characters).You can use 0–9.
• Redial the new passcode to verify. If successful, you will hear two beeps. Four
beeps indicate an incorrect code.Reenter the code again.
• Press TRANSFER to store the new passcode.
From the LCD:
• Press MENU button.
• Scroll to MY PHONE option and press ENTER.
• Scroll to CHANGE PASSWORD and press ENTER—OR—you may dial 3 and
immediately enter the option.
• Enter CURRENT PASSWORD,press ENTER.
• Enter NEW PASSWORD and press ENTER.
• Enter NEW PASSWORD again,for confirmation and press ENTER.
• Press CANCEL to return to the Main Option Page—OR—press END to return
to idle screen.
5112l_guide.qxp 5/9/2006 9:19 AM Page 56