Filter
Top Products
38
• You will be connected to the parked call.
NOTES:
1. If the call is not retrieved within a pre-programmed period of time,it will recall
your keyset and have a slow flashing amber light.You cannot park and page
intercom calls.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you receive a busy
signal,you can leave a message indication:
• Press the MESSAGE button—OR—dial 43 and receive confirmation tone.
Hang up.
• The message button on the Main Programmable Button screen and the TSI
will flash at the called station.
NOTES:
1. A station can have up to five message indications.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
CANCELING MESSAGES
To cancel a message indication that you left at another station, dial 42 plus the
extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42 plus your extension.
Your MESSAGE button indicator will stop flashing and the TSI will go out.
NOTE:If the Hot Keypad feature has been turned off,you must first lift the handset
or press the SPEAKER button before you begin dialing.
RETURNING MESSAGES
• Press the MESSAGE button or dial 43.The first station that left a message will
be called automatically.If that station does not answer,your MESSAGE button
indicator will continue to flash and the TSI will stay on.
• Repeat until all messages have been returned in the order received.
• Your MESSAGE button indicator will stop flashing and the TSI will turn off
when all messages have been returned.
NOTES:
1. Display keyset users can view message indications and return them in any
order. See Viewing Message Indications under Display Features.
5112l_guide.qxp 5/9/2006 9:19 AM Page 44