Filter
Top Products
6. FACTORY RESET
This option resets ITP to factory default settings.
7. REBOOT
This option reboots the ITP.
NAVIGATING THE MENUS
When programming within various menu options,information can be entered via
the dial pad keys using [0]-[9] and [
✱✱
] dial keys,as well as utilizing the navigation
button assembly.
The button used for editing and their features are summarized below.
BUT
TON FEATURES
Left and Right ......................To move a cursor (highlighted area) or to erase what is
entered.
Enter ........................................To save the current setting and end programming.
End............................................To cancel the current programming and return to the
Main Menu.
Cancel......................................To move back to the previous screen or delete the last
digit of the displayed option value.
[
✱✱
] ............................................To enter [.] between IP address fields.
[0]-[9] ......................................To enter numerical values.
SETTING THE NETWORK PARAMETERS
Utilize the following programming steps to program the ITP-5112L IP keyset to
operate within the users network.
System Easy Wizard
By selecting this option,the System Easy Wizard can guide you through setting up
your network parameters.If you want to set up these parameters individually, fol-
low the instructions below.
Network Parameter Setup
From the Configuration Main Menu, select [3.
Network Setup] to set or modify the network
parameters. The LCD will display the Network
Setup screen.
12
Network Setup
1.Manual IP
2.DHCP
3.PPPoE
5112l_guide.qxp 5/9/2006 9:18 AM Page 18