Filter
Top Products
58
DISPLAY NUMBER DIALED
Display keysets begin showing digits as they are dialed.They will stay in the dis-
play until the call duration timer comes on automatically or the TIMER button is
pressed.If the call duration timer is not used,the number dialed will be displayed
until the call is released,transferred or put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls.A few seconds after you
dial a telephone number,the timer appears in the display.It appears immediately
for incoming calls.The call timer continues for the duration of the call.Call dura-
tion times are displayed in minutes and seconds.If a call lasts longer than 60 min-
utes,the timer restarts.
You can press the TIMER button to manually begin timing a call.Press it again to
stop timing. If you press it while the automatic timer is on, the call duration time
is restarted.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.
• With the handset on-hook,press TRANSFER and then dial 110.
• Dial 011 to turn the auto timer on or 010 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option,press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and
immediately enter the option.
• Scroll to AUTO TIMER,press ENTER.
• Press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
TIMER FUNCTION
Display keyset users may use this feature as a simple stopwatch.
• When the keyset is idle,press the TIMER button to start timing.
• Press the TIMER button again to stop timing.
• Read the elapsed time in the display.
• Lift the handset and replace it.The display will return to date and time.
5112l_guide.qxp 5/9/2006 9:19 AM Page 64