Filter
Top Products
6. Press the soft button.
7. The display will show “Line (1–4) AA is off” if auto attendant has been turned off
on the phone line. If auto attendant is on, the display will show
“Line (1–4) AA is on”.
Record Outgoing Message (OGM)
The Record Outgoing Message (OGM) allows you record up to 5 greeting messages
up to 60 seconds each from the Base Unit. The default automated outgoing message
(OGM) for all lines is “Please enter the extension number or press zero for the
operator.”
1. On the Base Unit, press the Auto Att button.
2. Press 5 or 6 on the Navigation button until “Configure AA” appears on the
display.
3. Press the soft button.
4. Press 5 or 6 on the Navigation button until “Record OGM” appears on the
display.
5. Press the soft button.
6. Up to 5 different greetings can be saved. Select a greeting (1–5) by pressing
5 or 6 on the Navigation button.
NOTE: The greeting locations (1-5) are the same as the default greeting until a new OGM is
recorded and overwrites them. The “Default“ OGM cannot be changed or deleted.
7. Press the soft button.
8. A long beep will sound. The user will record their message when the beep ends.
9. Press the soft button to stop recording.
10. To add or re-record a greeting, repeat the steps for the “Record OGM” function.
Advanced Functions of Your RCA 25450 Phone System
74