Filter
Top Products
37
2. Press the Redial button.
3. Press MEM button again to confirm. You will hear a confirmation tone.
NOTE: If the redial number is longer than 20 digits, the redial number cannot
be stored in memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE (OF A STORED NUMBER)
Press the #PAUSE button on the handset’s touch-tone pad to insert a delay
in dialing sequence of a stored number when a pause is needed to wait
for a dial tone (for example, after you dial 9 for an outside line, or to
wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the
telephone number during memory storing.
REVIEWING RECORDS STORED IN MEMORY
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM button to display
SELECT MEMORY 01-50
.
3. Press the CID/VOL ( or ) buttons to scroll the records, or use the
handset’s touch-tone pad to enter the memory location number (01-50).
CHANGING RECORDS STORED IN MEMORY
Follow items 1 to 7 for Storing Names and Numbers in Memory.
DELETING RECORDS STORED IN MEMORY
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM button to display
SELECT MEMORY 01-50
.
3. Press the CID/VOL ( or ) buttons to scroll to the record you want
to delete or use the touch-tone pad to enter the desired memory
location (01-50).
4. Press the DEL button to mark the record for deletion. The display
shows
DELETE?
5. Press the DEL button to delete the record.
DELETED
shows in the display.
NOTE: If you don’t want to change or delete a record, simply press the
*EXIT button, or wait for one minute to exit the review mode automatically.