Filter
Top Products
32
If you get a busy signal and want to keep dialing the number, press the
REDIAL button to quickly redial the number.
EXIT
Press the *EXIT button to exit a menu function and return to the
standby screen.
PAGE
The page feature helps you locate a misplaced handset. To send and receive
pages, all handsets must be registered. If your handset is not registered,
follow the instructions in the Registration section of this manual.
HANDSET TO HANDSET PAGING
Dual handsets are respectively named as Handset 1 and Handset 2.
1. Make sure the phone is OFF (not in talk mode).
2. Press and release the PAGE/INT button on a handset.
PAGING
EXTENSION?
shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page.
NOTE: If more than 2 handsets have been registered, you can page all
handsets by pressing 5.
4. To cancel the page, press the *EXIT button, or press the PAGE/INT
button. Or you may press TALK/END/CALLBACK on the receiving
handset to enter intercom mode.
PAGING FROM THE BASE/GROUP PAGE
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. Both handsets beep for two minutes,
and
PAGING FROM BASE
shows on each handset’s display.
2. To cancel the page, press the page button on the base, or press the
TALK/END/CALLBACK button or the *EXIT button on each handset.
MUTE
To have a private, off-line conversation, use the MUTE feature. The party
on the telephone line cannot hear you, but you can hear them.
1. Press the MUTE/PROG button. The handset display shows
MUTE ON
.
2. Press the MUTE/PROG button to cancel and return to your
phone conversation.