Filter
Top Products
29
7. Use the touch-tone pad to select
1YES
or
2NO
, or use the CID/VOL ( or )
button to move the cursor to
1YES
or
2NO
.
2NO
is the default setting.
NOTE: If you choose “YES” all the settings in the programmable menu are
returned to factory default setting.
8. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone.
TELEPHONE OPERATION
CHARGE INDICATOR
When the in use/charging indicator on the base or the charge indicator
on the extra charger is lit, the handset is correctly seated in the cradle
and is charging.
MAKING CALLS
1. Pick up the handset, and press the TALK/END/CALLBACK button.
Listen for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/END/CALLBACK button.
3. When finished, press the TALK/END/CALLBACK button to hang up.
ANSWERING CALLS
1. When the phone rings, pick up the handset, and press the TALK/END/
CALLBACK button.
2. When finished, press TALK/END/CALLBACK to hang up.
NOTE: Adjust the handset volume by pressing the CID/VOL ( or )
button during a call.
SPEAKERPHONE OPERATION
ANSWERING A CALL WITH SPEAKERPHONE
1. When the phone rings, press the SPKR button on the handset.
2. When finished, press the SPKR button again to hang up.
MAKING A CALL WITH SPEAKERPHONE
1. Make sure the phone is OFF (not in talk mode).